落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-14 18:47
浏览次数:2193
摘要:
ASTMD495耐高压低电流电弧放电试验机

高电压降小功率耐压仪(耐弧光耐压仪)-(计算方法机保持)

High voltage low current tester (arc resistance tester) - (computer control)

品牌名稱:耐电弧试验机

Product name: electric arc resistance tester

成品规格型号:NDH-A

Product model: NDH - A

无法标准:GB/T 1411-2002《液体电绝缘物料耐高降低直流电压电弧焊接充放电的试验台》(就是指IEC  61621-1997)及ASTM D495等标准单位的条件的设计手工制造的,并复合IEC 149、UL 746A等耐压试验技巧

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

主要的支持超范围及效果:

本检验机是,并按照采适用电动机、电气产品开关和家庭工厂用电气产品开关等服务行业的高压电工用金属、硅胶粘合剂胶和隔绝带漆等隔绝带村料的耐焊弧功效鉴定,主适用胶体隔绝带村料如:金属、薄膜和珍珠棉、硅胶粘合剂、矿石、瓷质、磨砂玻璃、隔绝带油、隔绝带漆、纸壳等有机溶剂的耐焊弧功效公测;

本经过多次进行實驗发现机由计算出来机设定正常运行,可不可以表现所选进行實驗的状态及进行實驗精力,进行實驗完后并包存所选进行實驗数据显示,并可印刷.标准规范调查通知单。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为上下两边混合式架构,下边为运作软件,上半部为做实验的时候箱。

2 本物品采取*新智力控住技术应用,凭借挑选系统软件(IEC或ASTM)可系统自动实行测试,并在计算机上体现 试验检测的过程 和结杲。

3 **耐热性很好,抗不干扰特性强,测试仪精确度提高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电孤通断时间间隔随机误差:不大于 ±10ms

2 调压器使用量:2kVA

3 额定负载耐压试验端电压:12.5kV

4 校正相电压gps精度:±3%

5 交流电有效控制表面粗糙度:±10%  感应电流校正精度等级:1.5%

6 电极材料对试件气压:(0.5±0.05)N

7 电级的材料:钨棒

8 参比电极相距:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 实用情况的温度:(23±2)℃

10 在使用的环境内部含水率:(50±5)%

11 电原:220V±5%  50Hz  10A

12 实验    方式方法:   行业标准/美标/10 mA 重复/20 mA 连续式/30 mA反复/40 mA反复

13 检测应用程序如下图所示:

程度段

电孤电压

mA

电弧放电通断日期s

各子程序段将持续日期s

经过多次实验发现总时光s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

间隔通

60

240

5

20

间断通

60

300

6

30

接连通

60

360

7

40

连续性通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

序号顺序

品牌

总量

微信备注

01

耐电弧放电測試仪

一套

 

02

金属电极平台

每套

 

03

金属电极网架支座

做一套

 

04

供电电线

一个

 

05

接地极放**

两支

 

06

交流电毫安表

买台

 

07

笔记本电脑测控系统

两套

 

08

试板架

一朵

 

09

金属电极间距规范标准块

2块

 

10

视角规范块

2块

 

11

陶瓷制品片

2片

 

12

喷墨直接各种打印机

1台

产品

13

计算公式机

1台

品牌标志

14

使用的介绍书

1份

 

15

合格达标证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 产品的型号查询:

NDH-A    耐焊弧试验检测仪-微机控住

NDH-B    耐电孤测试仪-触摸式屏把控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪