落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高电阻值小电流值可靠性检验仪(耐脉冲可靠性检验仪)-(算机操作)

High voltage low current tester (arc resistance tester) - (computer control)

车辆标题:耐电弧试验机

Product name: electric arc resistance tester

好产品型號:NDH-A

Product model: NDH - A

要求条件:GB/T 1411-2002《液体绝缘性材质耐高压得过低电压电流电孤释放的检测》(同等IEC  61621-1997)及ASTM D495等基准的需要设定加工制造的,并非常符合IEC 149、UL 746A等现场实验方式

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

重要适用于依据及性能:

本试验台机是通过运适用变频电动机、电商和家庭支出电商等服务业的电工维修用塑、树脂胶胶胶和接地带带漆等接地带带资料的耐脉冲功能评判,主适用无水硫酸铜接地带带资料如:塑、薄膜和珍珠棉、树脂胶胶、白云母、瓷砖、玻璃窗、接地带带油、接地带带漆、硬纸板等导电介质的耐脉冲功能测量;

本调查操作室检测机由计算公式机管控工作,能能屏幕上显示现在调查操作壮态及调查操作时候,调查操作开始后并存储现在调查操作的数据,并可彩打.标淮科学试验报告书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为前后一梯构成,下面为操作步骤设备,上侧为试验报告箱。

2 本成品所采用*新智力掌控方法,确认首选系统(IEC或ASTM)可定时确定可靠性试验,并在台式机上显视检测阶段和結果。

3 **的性能优异,抗电磁干扰作用强,测试图片导致精性强。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧焊接通断日期测量误差:值为 ±10ms

2 调压器出水量:2kVA

3 額定检验额定电压:12.5kV

4 可靠性试验交流电压精准度:±3%

5 电流大小操作误差:±10%  感应电流检测gps精度:1.5%

6 参比电极对试板压力值:(0.5±0.05)N

7 工业资料:钨棒

8 电级高度:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 利用周围环境工作温度:(23±2)℃

10 便用区域对湿度的:(50±5)%

11 电原:220V±5%  50Hz  10A

12 做实验的时候    工艺:   国家标准/美标/10 mA 不间断/20 mA 连继/30 mA不断/40 mA连着

13 实验设计程序流程以下的:

流程段

焊弧电压

mA

脉冲通断时候s

各方式段长期时间间隔s

试验检测总周期s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

间隔通

60

240

5

20

连续性通

60

300

6

30

不断通

60

360

7

40

接连通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

序号顺序

名稱

数据

备注栏

01

耐电弧焊接测试测试仪器

整台

 

02

电极片装置

两套

 

03

电极材料支架

一种

 

04

电原高压电缆

买套

 

05

跨接放**

一批

 

06

电流值毫安表

买台

 

07

租赁测控电脑软件

一台

 

08

样品架

一根

 

09

探针空距标准规范块

2块

 

10

度角的标准块

2块

 

11

工业陶瓷片

2片

 

12

喷墨复印机机

1台

国产品牌

13

求算机

1台

企业品牌

14

利用情况维修手册

1份

 

15

完成证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 物品类型:

NDH-A    耐弧光检验仪-微机调控

NDH-B    耐电弧放电实验室检测仪-触感屏操控

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪